Product characteristics
The sensor adopts a double shear beam structure, which can replace the pin shaft in the pulley to measure radial force values.
Mainly used for overload protection of construction elevators.
Suitable for process control, overload protection, and measurement and control systems in industries such as lifting, water conservancy, and shipbuilding.
Using a built-in transmitter to convert into current and voltage signals.
Product Description
1. The company's products are special customized products |
2. The price of this product is for reference only |
3. To purchase products, contact customer service to provide specific parameter selection |
Product Parameters
Rated load: 3t |
Sensitivity: 1.0 +0.05 mVN |
Nonlinear. : ± 0.1~+0.3 %F*S |
Lag error: ± 0.1 %F*S |
Repeatability error: ± 0.1 %F*S |
Creep: ± 0.05%F*S |
Zero point temperature coefficient: ±0.05 % F*S/10 ºC |
Sensitivity temperature coefficient: ± 0.05% F*S/10ºC |
Input resistance: 750 ± 30 Ω |
Output resistance: 700 ± 5 Ω |
Operating temperature range: -20°C~+70°C |
Safe overload: 150% F*S |
Insulation resistance: ≥2000MΩ |
Excitation voltage: 5V~12V |
Material: Stainless steel |
Cable: φ5X 3M |
Product Size
Attention
- Prohibit measuring media that are incompatible with the transmitter material
- Ensure that the power supply voltage meets the product requirements and wire according to the instructions
- Install the transmitter in a ventilated and dry place to avoid direct exposure to strong light and rain
- Pay attention to using snake skin pipes or iron pipes to protect the outgoing cables, or raise the cable rack
- It is recommended to power on for at least 10 minutes to achieve optimal product performance
- When disassembling the transmitter, ensure that the pressure source is turned off to prevent the medium from spraying out
- This product is not explosion-proof and can cause major accidents when used in explosion-proof areas
Product application
Our Advantages
Packaging & Shipping