HPC-10 Small Upper Lower Limit Alarm Replacement Electric Contact Intelligent Micro Switch Pressure Liquid Level Temperature Controller Sensor

• Type: Explosion-proof Pressure Transmitter
• Structure Type: Diffused Silicon Pressure Transmitter
• Measuring Medium: Liquid
• Accuracy Grade: 0.5G
• Pressure range: 0～1.5kPa
• IP Rating: IP65
• Model NO.: HPC-10
• Certification: CE
• Customized: Customized
• Transport Package: Package
• Specification: BLUE
• Trademark: ZEIHOU
• Origin: China

Product Description

Product Description

1. The company's products are special customized products

2. The price of this product is for reference only

3. To purchase products, contact customer service to provide specific parameter selection

 

Product Size

Product Parameters

 

Model: HPC-10	Pressure range: -0.1~250MPa optional (liquid level, temperature)
Precision (% FS): 0.1/0.2/0.5 optional	Pressure forms: gauge pressure, absolute pressure, differential pressure
Alarm value: can be set within the full range	Output signal: Standard RS485 interface MODBUS S protocol, 2-way NPN/PNP optional
Load capacity:<100mA, 24VDC	Alarm mode: high/low/out of range/within range alarm mode
Power supply: 9-28VDC	Medium temperature: -20-65 ° C
Storage temperature: -40-100 ° C	Sensor diaphragm: 316L/ceramic diaphragm optional (ceramic capacitor diaphragm needs to be ordered)
Shell material: ABS engineering modified plastic	Pressure interface: 304/316 material G1/4 thread (316 material, other threads need to be ordered)
Protection level: IP65	Output wiring: AVVR 4 * 0.2 cable, 1.5 meters

 

Product application

Attention

 

1. Prohibit measuring media that are incompatible with the transmitter material
2. Ensure that the power supply voltage meets the product requirements and wire according to the instructions
3. Install the transmitter in a ventilated and dry place to avoid direct exposure to strong light and rain
4. Pay attention to using snake skin pipes or iron pipes to protect the outgoing cables, or raise the cable rack
5. It is recommended to power on for at least 10 minutes to achieve optimal product performance
6. When disassembling the transmitter, ensure that the pressure source is turned off to prevent the medium from spraying out
7. This product is not explosion-proof and can cause major accidents when used in explosion-proof areas

Our Advantages

 

Packaging & Shipping