HPC-2000 Level Controller Digital Display Pressure Switch Axial Mounted Relay Output Replaces Electric Contact Meter Sensor

• Type: Double Flange Differential Pressure
• Contact: Contact
• Output Signal Type: Switching Type
• Production Process: Integration
• Feature: Low Temperature Resistant
• Material: Plastic
• Model NO.: HPC-2000
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• Measurement Accuracy: 0.1~0.5%Fs
• Measuring Range: 0-200MPa
• Transport Package: Package
• Specification: silver
• Trademark: ZEIHOU
• Origin: China

Product Description

Product Description

1. The company's products are special customized products

2. The price of this product is for reference only

3. To purchase products, contact customer service to provide specific parameter selection

Product Parameters

 

Model: HPC-2000	Pressure form: gauge pressure, absolute pressure
Range: 0~5, 100, 500, 800, 1000 Kpa	0~2, 10, 60, 120 Mpa
Output signal: Relay, MODBUS, analog, digital output optional	Display mode: 4-bit LED display
Accuracy (%FS) : 0.25-0.5	Nonlinearity (%FS) : ≤ 0.2 / ≤0.5
Regression lag (%FS) : ≤ 0.2 / ≤0.5	Zero temperature drift (%FS/°C) : ≤0.1
Full degree temperature bleaching (%FS) : ≤ 0.02	Operating voltage (V) : 12-36VDC
Ambient temperature (°C) : -20~60C	Overload capacity (%) : 200
Life: <90 million pressure cycles (25°C)	Load resistance (Q) : ≤750

Response time (ms) : ≤0.1	Measuring media: Various media compatible with 316L
Diaphragm material: 316L or ceramic diaphragm	Interface thread: M20*1.5 or custom
Joint material: 304, 316, titanium material, PTFE	Protection class: IP65

Product advantage

Product Display

Product Size

Attention

 

1. Prohibit measuring media that are incompatible with the transmitter material
2. Ensure that the power supply voltage meets the product requirements and wire according to the instructions
3. Install the transmitter in a ventilated and dry place to avoid direct exposure to strong light and rain
4. Pay attention to using snake skin pipes or iron pipes to protect the outgoing cables, or raise the cable rack
5. It is recommended to power on for at least 10 minutes to achieve optimal product performance
6. When disassembling the transmitter, ensure that the pressure source is turned off to prevent the medium from spraying out
7. This product is not explosion-proof and can cause major accidents when used in explosion-proof areas

Our Advantages

 

Packaging & Shipping