HFS-DL2 Shaft Pin Weighing Sensor Pressure Force Measuring Device Overload Limiter Tower Llift Shaft Pin Weighing Transmitter

• Type: Capacitive Pressure Sensor
• Component: Mechanical Structure Type
• For: Capacitive Pressure Transmitter
• Output Signal Type: Digital Type
• Production Process: Integration
• Material: Stainless Steel
• Model NO.: HFS-DL2
• Thread Type: PT
• Wiring Type: Two-Wire
• Measuring Medium: Pressure
• IP Rating: IP67
• Certification: CE
• Customized: Customized
• Precision: 0.05%Fs
• Supply Voltage: 12V
• Working Force: 1t-40t
• Operating Temperature: 70
• Transport Package: Package
• Specification: silver
• Trademark: ZEIHOU
• Origin: China

Product Description

Product characteristics

The sensor adopts the double shear beam structure, which can be used to measure the radial force value instead of the pin shaft in the pulley.

It is suitable for process control, overload protection and measurement and control system in hoisting, water conservancy, ship and other industries.

A built-in transmitter can be used to convert current and voltage signals.

Product Description

1. The company's products are special customized products

2. The price of this product is for reference only

3. To purchase products, contact customer service to provide specific parameter selection

Product Parameters

 

Rated load: 1t~40t	Sensitivity: 1.0~1.5±0.05 mV/N
Nonlinear. : ±0.1~±0.3%F*S	Lag error: ±0.1%F*S
Repeatability error: ±0.1%F*S	Creep: 0.05 %F+S
Zero point temperature coefficient: ± 0.05 %F+S/10ºC	Sensitivity temperature coefficient:  ± 0.05 %F+S/10ºC
Input resistance:  750±30Ω	Output resistance: 700±5 Ω
Operating temperature range: -20°C~+70°C	Safe overload: 150% F*S
Insulation resistance: ≥2000MΩ	Excitation voltage: 5V~12V
Material: Alloy steel, stainless steel	Cable: φ5X 3M

 

Product Size

Attention

 

1. Prohibit measuring media that are incompatible with the transmitter material
2. Ensure that the power supply voltage meets the product requirements and wire according to the instructions
3. Install the transmitter in a ventilated and dry place to avoid direct exposure to strong light and rain
4. Pay attention to using snake skin pipes or iron pipes to protect the outgoing cables, or raise the cable rack
5. It is recommended to power on for at least 10 minutes to achieve optimal product performance
6. When disassembling the transmitter, ensure that the pressure source is turned off to prevent the medium from spraying out
7. This product is not explosion-proof and can cause major accidents when used in explosion-proof areas

Product application

 

Our Advantages

 

Packaging & Shipping