HPT-16 4-20mA Air Plug Line Intelligent Digital Pressure Transmitter Diffused Silicon RS485 Pneumatic Hydraulic Sensor

• Customization: Available
• Type: Network Type
• Measuring Medium: Temperature
• Model NO.: HPT-16
• Display Type: LCD
• Site Display: Site Display
• Accuracy: 0.5
• IP Rating: IP65
• Certification: RoHS
• Customized: Customized
• Measuring Rangee: 0-250 MPa
• Precision Class: 0.1~0.5%Fs
• Connection Type: Screw/Chuck Mounting
• Ambient Temperature: -20~60
• Shell Material: Aluminum
• Output Signal: 4-20mA/0-10V/ Communication/Switch
• Transport Package: Package
• Specification: black
• Trademark: ZEIHOU
• Origin: China

Product Description

 

Product Description

1. The company's products are special customized products

2. The price of this product is for reference only

3. To purchase products, contact customer service to provide specific parameter selection

 

Product Size

Product Parameters

Model: HPT-16	Pressure range: 0-250.0Mpa
Pressure mode: vent gauge pressure/seal gauge pressure	Power supply voltage: Optional according to customer requirements
Accuracy: ± 0.5%FS	Output signal :4~20mA/O~ 5V/ Switching/communication optional
Compensation temperature: 20-70°C	Ambient temperature: -20~6°C
Storage temperature: -40~125*C	Overload pressure: 3 times
Failure pressure: 5 times	Response time: 10mS
Vibration resistance: 20g, 10~2000Hz35	Impact resistance: 50g, 11-mS
Media compatibility: Various media compatible with 304L	Insulation impedance: greater than 100MN@250VDC

Pressure interface: 7/16-20UNF	Electrical connection: Metr-Park 150 3-pin or custom
Protection class: IP65	Weight: 80g

Product advantage

Product application

Attention

 

1. Prohibit measuring media that are incompatible with the transmitter material
2. Ensure that the power supply voltage meets the product requirements and wire according to the instructions
3. Install the transmitter in a ventilated and dry place to avoid direct exposure to strong light and rain
4. Pay attention to using snake skin pipes or iron pipes to protect the outgoing cables, or raise the cable rack
5. It is recommended to power on for at least 10 minutes to achieve optimal product performance
6. When disassembling the transmitter, ensure that the pressure source is turned off to prevent the medium from spraying out
7. This product is not explosion-proof and can cause major accidents when used in explosion-proof areas

Our Advantages

 

Packaging & Shipping